SprayMax PaintRepair FillClean System

1K/2K FillClean aerosols are prefilled with solvents and propellants and ready for the one-time filling with 3.3fl.oz (1.65 fl.oz) of paint. 2K FillClean aerosols also contain a separate hardener cylinder which is filled with activator. Each FillClean aerosol is a customized formulation to achieve the best spraying result when filled with the respective paint series.


FillClean aerosols are available for solvent/waterborne basecoats and single stage topcoats.


The unique, no-mess filling system permits easy filling of the FillClean aerosols. The cap of the FillClean aerosols is used during the filling process as a filling cylinder. The filling pad on the cap is pressed down during the filling process and the residual paint left between pad and cap indicates the colour of the paint filled into the aerosol.


To fill the 2K FillClean aerosol with the FillClean system the separately available Cap/Pad has to be ordered (Part no. 399 0260).

 

 

There are two types of FillClean machine available.

FillClean Machine Pneumatic
Art. No. :
990 245    PU = 1

FillClean Machine Manuel
Art. No. :
990 249    PU = 1

FillClean Machine Pneumatic, Art.No. 990 245
FillClean Machine Manuel, Art.No. 990 249

Advantages

  • Flexible and mobile
  • No cleaning and waste-free
  • Easy to operate

 

Scope of delivery

FillClean Machine Pneumatic, Art.No. 990 245

  • FillClean machine
  • FillClean filling cylinder for SprayMax FillClean aerosols
  • Air tube
  • Connector
  • Instruction for use

FillClean Machine Manuel, Art.No. 990 249

  • FillClean machine
  • FillClean filling cylinder for SprayMax FillClean aerosols
  • Instruction for use

Technical Data

FillClean Machine Pneumatic, Art.No. 990 245

  • Diameter: 5.2’’
  • Height: 14.4’’
  • Weight: 8.7 lbs.
  • Pressure 100-130psi
  • Filling cylinder 100ml/3.3fl.oz

FillClean Machine Manuel, Art.No. 990 249

  • Diameter: 5.2’’
  • Height: 25.2’’
  • Weight: 13.9 lbs.
  • Filling cylinder 100ml/3.3fl.oz

Accessories

Filling Cylinder

Art.No.
3 990 247
1 pc.

 

Filling Cylinder
Filling Cylinder (additional equipment)

Mounting Plate

Art.No.
990 242
1 pc.

 

The FillClean mounting plate is used for the safe mounting of the FillClean machine. It provides a better stability of the FillClean machine and a safe guidance of the air tube.

Filling Adapter

Art.No.
990 014
1 pc.

 

The Filling adapter is required to fill the 250ml FillClean aerosols.
It equals the lower height and provides a stable fixing to ensure a safe and correct filling process.

Set of Caps

Art.No.
3 990 260
6 pcs.

 

The FillClean set of caps is required to ensure the no-mess filling of the SprayMax
2K FillClean aerosols.